Melexis MLX90109EDC-AAA-000-TU RFID Module, 3.1 → 5.5V

查看所有RF Modules
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
RS庫存編號:
194-2925
製造零件編號:
MLX90109EDC-AAA-000-TU
製造商:
Melexis
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Melexis

Component Type

Module

Supported Bus Interfaces

2-Wire

Supply Voltage

3.1 → 5.5V

Dimensions

4.98 x 3.99 x 1.47mm

Height

1.47mm

Length

4.98mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Width

3.99mm

The MLX90109 is a single chip RFID transceiver for the 125kHz frequency range. It has been conceived for minimum system cost and minimum power consumption offering all required flexibility for a state of the art AM transceiver base station.
An external coil (L) and capacitor (C) are connected as a parallel resonant circuit that determines the carrier frequency and the oscillator frequency of the reader. This eliminates zero modulation effects by perfect antenna tuning, and avoids the need for an external oscillator.
The reader IC can easily be switched to power down by setting the antenna amplitude to zero.
The MLX90109 can be configured to decode the transponder signal on-chip. In this case the decoded signal is available through a 2-wire interface with clock and data. For minimum interface wiring, the non-decoded transponder signal can also be made available on a single wire interface.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


相关链接