FTDI Chip FT4232HPQ-TRAY, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN

RS庫存編號:: 228-3127
製造零件編號:: FT4232HPQ-TRAY
製造商:: FTDI Chip

FTDI Chip FT4232HPQ-TRAY, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 件）*

HK$61.60

訂單超過 HK$250.00 免費送貨

暫時缺貨

從 2026年9月02日發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 9	HK$61.60
10 - 99	HK$60.30
100 +	HK$59.30

* 參考價格

RS庫存編號:: 228-3127
製造零件編號:: FT4232HPQ-TRAY
製造商:: FTDI Chip

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	FTDI Chip
	Number of Transceivers	4
	Product Type	Controller IC
	Maximum Data Rate	12Mbps
	USB Specification	USB Type C
	Sub Type	Controller
	Power Supply Type	Single
	ESD Protection	Yes
	Minimum Supply Voltage	3.3V
	Maximum Supply Voltage	1.32V
	Mount Type	Surface
	Package Type	QFN
	Pin Count	68
	Minimum Operating Temperature	-40°C
	Supported Protocols	USB 2.0
	Maximum Operating Temperature	85°C
	Height	0.9mm
	Series	FT4233HP
	Length	8mm
	Standards/Approvals	RoHS
	Width	8 mm
	Supply Current	0.87mA
	Automotive Standard	No

	選取全部
	品牌 FTDI Chip
	Number of Transceivers 4
	Product Type Controller IC
	Maximum Data Rate 12Mbps
	USB Specification USB Type C
	Sub Type Controller
	Power Supply Type Single
	ESD Protection Yes
	Minimum Supply Voltage 3.3V
	Maximum Supply Voltage 1.32V
	Mount Type Surface
	Package Type QFN
	Pin Count 68
	Minimum Operating Temperature -40°C
	Supported Protocols USB 2.0
	Maximum Operating Temperature 85°C
	Height 0.9mm
	Series FT4233HP
	Length 8mm
	Standards/Approvals RoHS
	Width 8 mm
	Supply Current 0.87mA
	Automotive Standard No

The FTDI Chip FT4233HP/FT4232HP is a Hi-Speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the existing FT4232H – Quad Hi-speed USB to multipurpose UART/MPSSE solution.

Supports PD Specification 3.0

1 x USB PD 3.0 Port supports Dual Role Swap Function

Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source

Type-C/PD Physical Layer Protocol

PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM

PD mode configuration through external EEPROM

Options to use external MCU controlling PD policy through I2C interface

Up to 8 Configurable PD GPIO pins support

External MCU support through I2C bus

FTDI Chip FT4232HPQ-TRAY, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN

訂單超過 HK$250.00 免費送貨

相关链接