Infineon TLE9351SJXTMA1, CAN Caps 5 Mbps, 8-Pin PG-DSO-8
- RS庫存編號:
- 273-7554
- 製造零件編號:
- TLE9351SJXTMA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 卷，共 2500 件）*
HK$13,845.00
訂單超過 HK$250.00 免費送貨
有庫存
- 加上 2,500 件從 2026年3月09日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每卷* |
|---|---|---|
| 2500 + | HK$5.538 | HK$13,845.00 |
* 參考價格
- RS庫存編號:
- 273-7554
- 製造零件編號:
- TLE9351SJXTMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Maximum Data Rate | 5Mbps | |
| Product Type | CAN Caps | |
| Number of Transceivers | 1 | |
| Sub Type | 1/1 Half-Duplex CAN Transceiver | |
| Power Down Mode | Yes | |
| Supply Current | 5mA | |
| Mount Type | Surface | |
| Package Type | PG-DSO-8 | |
| Interface Type | ISO 7637 | |
| Pin Count | 8 | |
| Minimum Supply Voltage | -0.3V | |
| Maximum Supply Voltage | 6V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Width | 3.9 mm | |
| Series | TLE9351SJ | |
| Length | 4.9mm | |
| Height | 1.75mm | |
| Standards/Approvals | ISO 7637, AEC‑Q100, SAE J1939, RoHS, ISO 11898‑2/‑5 | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Maximum Data Rate 5Mbps | ||
Product Type CAN Caps | ||
Number of Transceivers 1 | ||
Sub Type 1/1 Half-Duplex CAN Transceiver | ||
Power Down Mode Yes | ||
Supply Current 5mA | ||
Mount Type Surface | ||
Package Type PG-DSO-8 | ||
Interface Type ISO 7637 | ||
Pin Count 8 | ||
Minimum Supply Voltage -0.3V | ||
Maximum Supply Voltage 6V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Width 3.9 mm | ||
Series TLE9351SJ | ||
Length 4.9mm | ||
Height 1.75mm | ||
Standards/Approvals ISO 7637, AEC‑Q100, SAE J1939, RoHS, ISO 11898‑2/‑5 | ||
Automotive Standard AEC-Q100 | ||
The Infineon High speed CAN transceiver used in HS CAN systems for automotive applications as well as for industrial applications. It is designed to fulfil the requirements of ISO 11898 2 2016 physical layer specification as well as SAE J1939 and SAE J2284. As an interface between the physical bus layer and the HS CAN protocol controller, the CAN transceiver is designed to protect the microcontroller against interferences generated inside the network. A very high ESD robustness and the optimized RF immunity allows the use in automotive applications without additional protection devices, such as suppressor diodes or common mode chokes.
RoHS compliant
TxD time out function
Over temperature protection
Protected against automotive transients
Stand by mode with minimized quiescent current