Gossen Metrawatt METRAHit CAL Multi-Function Calibrator, 20 mA, 999.9mV 45 mm 200 mm 75 mm

RS庫存編號:: 484-057
製造零件編號:: M244A
製造商:: Gossen Metrawatt

Gossen Metrawatt METRAHit CAL Multi-Function Calibrator, 20 mA, 999.9mV 45 mm 200 mm 75 mm

小計（1 件）*

HK$18,502.80

訂單超過 HK$250.00 免費送貨

有庫存

7 件準備從其他地點送貨
加上 2 件從 2026年3月20日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	HK$18,502.80

* 參考價格

RS庫存編號:: 484-057
製造零件編號:: M244A
製造商:: Gossen Metrawatt

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Gossen Metrawatt
	Product Type	Multi-Function Calibrator
	Maximum Voltage Measurement	999.9mV
	Accuracy	±1 %
	Port Connections	USB
	Maximum Current Measurement	20mA
	Battery Life	100h
	Battery Type	AA
	Power Source	Battery
	Safety Category Level	CAT IV, CAT III
	Safety Category Voltage	1000V
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Length	200mm
	Standards/Approvals	CE, ANSI/ESD S20.20:2014, BS EN 6134051:2007
	Width	75 mm
	Hazardous Area Certification	No
	Weight	750g
	Height	45mm
	Model Number	METRAHit CAL
	Resolution	0.1 s

	選取全部
	品牌 Gossen Metrawatt
	Product Type Multi-Function Calibrator
	Maximum Voltage Measurement 999.9mV
	Accuracy ±1 %
	Port Connections USB
	Maximum Current Measurement 20mA
	Battery Life 100h
	Battery Type AA
	Power Source Battery
	Safety Category Level CAT IV, CAT III
	Safety Category Voltage 1000V
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Length 200mm
	Standards/Approvals CE, ANSI/ESD S20.20:2014, BS EN 6134051:2007
	Width 75 mm
	Hazardous Area Certification No
	Weight 750g
	Height 45mm
	Model Number METRAHit CAL
	Resolution 0.1 s

COO (Country of Origin):: DE

Gossen Metrawatt Multi Function Calibrator

The Gossen Metrawatt METRAHIT multifunction calibrator has a highly accurate calibration and simulation instrument for electrical quantities.

As a handheld instrument, it is suitable for precise, onsite calibration and inspection tasks, as well as for test department and laboratory work. It allows the process engineer to simulate sensor conditions at the input of a transmitter while simultaneously measuring and storing the resulting signal output. Integral memory allows popular calibration procedures to be stored for transmitter testing in the field and calibration reports to be generated later.

Features and Benefits

0mA to 24mA source and 0mA to 300mA measure

0mA to 20mA and 4mA to 20mA preset ranges

Voltage output 0mV to 300mV, 3, 10 and 15V

Resistance simulated with 2 and 4 wire

Low resistance measurement of 0.01mΩ resolution

High resistance measurement up to 30MΩ

Simulation of RTD temperature sensors

Simulate extensive range of thermocouples with internal or external cold junction compensation

Frequency square wave pulse generator

Set calibration sequences including both, ramp and step functions with dwell periods

Ramp, step and dwell functions can be set with 1 second to 60 minutes intervals

Supplied with test leads/clips and protective holster with integral stand

Universal calibrator, simulator mA, mV ... V, 5 ...2000 Ω, degrees-C / degrees-F Pt100 / 1000, Ni100 / 1000,

Thermocouples range J, L, T, U, K, E, S, R, B, N

Applications

Process control automation

Manufacturing

Instrumentation

Certifications

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007