Gossen Metrawatt M516H Electrical Installation Tester 1000V Earth Resistance Measurement With RS232

RS庫存編號:: 145-586
製造零件編號:: M516H
製造商:: Gossen Metrawatt

Gossen Metrawatt M516H Electrical Installation Tester 1000V Earth Resistance Measurement With RS232

暫時無法供應

抱歉，我們不知道何時會到貨。

RS庫存編號:: 145-586
製造零件編號:: M516H
製造商:: Gossen Metrawatt

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Gossen Metrawatt
	Loop Impedance Test Type	High/Low Current
	Product Type	Electrical Installation Tester
	Automatic RCD Test	Yes
	RCD Ramp Test	Yes
	Model Number	M516H
	Non-Tripping	No
	Insulation Test Voltage	1000V
	Maximum Voltage Measurement	10V
	Test Type	RCD Test
	Earth Resistance Measurement	Yes
	Downloadable Data	Yes
	Interface Type	RS232
	RCD Test Type	AC, F, B+, Type B
	Remote Switch Mode	Yes
	Length	41cm
	Standards/Approvals	IEC 61557-11, IEC 61557-6, DIN EN 61557-14, IEC 61326-1, IEC 61557-14, DIN EN 61557-6, DIN EN 61557-4, DIN EN 61010-1, DIN EN 61326-2-1, DIN EN 61010-031, IEC 61557-4, IEC 61557-7, DIN EN 61557-11, IEC 61010-2-030, IEC 61557-2, IEC 60529, IEC 61557-10, IEC 61326-2-1, IEC 61010-1, DIN EN 61557-1, IEC 61010-2-032, DIN EN 61557-2, DIN EN 61557-10, IEC 61557-1, IEC 61010-031, DIN EN 61557-3, DIN EN 61557-7, DIN EN 60529, DIN EN 61326-1, DIN EN 61010-2-032, DIN EN 61010-2-030, IEC 61557-3
	Height	21cm
	Width	50cm
	IP Rating	IP40
	Test Standards	IEC 60060-1, DIN VDE 0472 (alle Teile), VDE 0105-100, IEC 61557-14, DIN EN 61851-1, VDE 0104, DIN VDE 0100-600, VDE 0472, VDE 0113-1, VDE 0122-1, OVE E 8101, VDE 0432-1, NIV, DIN EN IEC 61439-1, VDE 0100-710, DIN EN 62446-1, VDE 0413-14, DIN EN 61557-14, IEC 62446-1, IEC 61851-1, DIN VDE 0105-100, DIN EN 60060-1, EN 50110-1, VDE 0660-600-1, VDE 0126-23-1, DIN EN 60204-1, DIN EN 50191, IEC 60364-7-710, IEC 60364-6, SN 411000, IEC 60204-1, VDE 0100-600, DIN VDE 0100-710
	Minimum Operating Temperature	5°C
	Maximum Continuity Resistance	200Ω
	Safety Category Level	Frame Profile, 300 V CAT IV, 600 V CAT III
	Display Type	LCD Backlight
	Battery Type	Lithium-ion
	Safety Category Voltage	600V
	Power Source	16.7 Hz to 400 Hz, 3 x Lithium-Ion Batteries, 85 V to 264 V
	Maximum Operating Temperature	50°C
	Minimum Continuity Resistance	0Ω

	選取全部
	品牌 Gossen Metrawatt
	Loop Impedance Test Type High/Low Current
	Product Type Electrical Installation Tester
	Automatic RCD Test Yes
	RCD Ramp Test Yes
	Model Number M516H
	Non-Tripping No
	Insulation Test Voltage 1000V
	Maximum Voltage Measurement 10V
	Test Type RCD Test
	Earth Resistance Measurement Yes
	Downloadable Data Yes
	Interface Type RS232
	RCD Test Type AC, F, B+, Type B
	Remote Switch Mode Yes
	Length 41cm
	Standards/Approvals IEC 61557-11, IEC 61557-6, DIN EN 61557-14, IEC 61326-1, IEC 61557-14, DIN EN 61557-6, DIN EN 61557-4, DIN EN 61010-1, DIN EN 61326-2-1, DIN EN 61010-031, IEC 61557-4, IEC 61557-7, DIN EN 61557-11, IEC 61010-2-030, IEC 61557-2, IEC 60529, IEC 61557-10, IEC 61326-2-1, IEC 61010-1, DIN EN 61557-1, IEC 61010-2-032, DIN EN 61557-2, DIN EN 61557-10, IEC 61557-1, IEC 61010-031, DIN EN 61557-3, DIN EN 61557-7, DIN EN 60529, DIN EN 61326-1, DIN EN 61010-2-032, DIN EN 61010-2-030, IEC 61557-3
	Height 21cm
	Width 50cm
	IP Rating IP40
	Test Standards IEC 60060-1, DIN VDE 0472 (alle Teile), VDE 0105-100, IEC 61557-14, DIN EN 61851-1, VDE 0104, DIN VDE 0100-600, VDE 0472, VDE 0113-1, VDE 0122-1, OVE E 8101, VDE 0432-1, NIV, DIN EN IEC 61439-1, VDE 0100-710, DIN EN 62446-1, VDE 0413-14, DIN EN 61557-14, IEC 62446-1, IEC 61851-1, DIN VDE 0105-100, DIN EN 60060-1, EN 50110-1, VDE 0660-600-1, VDE 0126-23-1, DIN EN 60204-1, DIN EN 50191, IEC 60364-7-710, IEC 60364-6, SN 411000, IEC 60204-1, VDE 0100-600, DIN VDE 0100-710
	Minimum Operating Temperature 5°C
	Maximum Continuity Resistance 200Ω
	Safety Category Level Frame Profile, 300 V CAT IV, 600 V CAT III
	Display Type LCD Backlight
	Battery Type Lithium-ion
	Safety Category Voltage 600V
	Power Source 16.7 Hz to 400 Hz, 3 x Lithium-Ion Batteries, 85 V to 264 V
	Maximum Operating Temperature 50°C
	Minimum Continuity Resistance 0Ω

COO (Country of Origin):: DE

The Gossen Metrawatt test instrument is versatile all in one test instruments for use in AC and DC networks for market compliant testing of the effectiveness of protective measures at electrical systems or installations, electric machines, PV systems and electric charging stations. It can also be used for high voltage testing. It is ideal for installation, initial startup, periodic testing and troubleshooting.

Phase sequence testing

Measurement of insulation resistance RINS

Measurement of residual voltage without tripping the RCD

Measurement of tripping current with ramp function

Gossen Metrawatt M516H Electrical Installation Tester 1000V Earth Resistance Measurement With RS232

相关链接

第一時間了解我們的最新產品和優惠