Fluke 1662 Multifunction Tester 1000V With Wireless

RS庫存編號:: 113-5128
製造零件編號:: FLK-1662 UK
製造商:: Fluke

Fluke 1662 Multifunction Tester 1000V With Wireless

小計（1 件）*

HK$14,179.90

訂單超過 HK$250.00 免費送貨

有庫存

2 件準備從其他地點送貨
加上 15 件從 2026年5月15日起發貨
加上 7 件從 2026年6月11日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	HK$14,179.90

* 參考價格

RS庫存編號:: 113-5128
製造零件編號:: FLK-1662 UK
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Product Type	Multifunction Tester
	Loop Impedance Test Type	Phase to Neutral, Phase to Earth
	Automatic RCD Test	Yes
	Model Number	1662
	RCD Ramp Test	Yes
	Insulation Test Voltage	1000V
	Maximum Voltage Measurement	500V ac/dc
	Test Type	Resistance, Frequency, Wiring Polarity, Miniature GPS, RCD Test, Voltage, MOSFET, Phase Sequence Test, Insulation Resistance, Continuity
	Downloadable Data	Yes
	Interface Type	Wireless
	Continuity Test Current	1mA
	Battery Life	200h
	RCD Test Type	Type A, AC, Type G, Type S
	Remote Switch Mode	Yes
	Height	125mm
	Weight	1.3kg
	Standards/Approvals	CSA, CE, EN/IEC 610102034, EN/IEC 610101
	Length	100mm
	Width	250mm
	Test Standards	EN 61557-10, EN 61557-7, EN 61557-1
	IP Rating	IP40
	Safety Category Voltage	300, 500V
	Power Source	Battery
	Display Type	Primary Display
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	40°C
	Safety Category Level	CAT IV, CAT III
	Battery Type	AA
	Plug Type	UK

	選取全部
	品牌 Fluke
	Product Type Multifunction Tester
	Loop Impedance Test Type Phase to Neutral, Phase to Earth
	Automatic RCD Test Yes
	Model Number 1662
	RCD Ramp Test Yes
	Insulation Test Voltage 1000V
	Maximum Voltage Measurement 500V ac/dc
	Test Type Resistance, Frequency, Wiring Polarity, Miniature GPS, RCD Test, Voltage, MOSFET, Phase Sequence Test, Insulation Resistance, Continuity
	Downloadable Data Yes
	Interface Type Wireless
	Continuity Test Current 1mA
	Battery Life 200h
	RCD Test Type Type A, AC, Type G, Type S
	Remote Switch Mode Yes
	Height 125mm
	Weight 1.3kg
	Standards/Approvals CSA, CE, EN/IEC 610102034, EN/IEC 610101
	Length 100mm
	Width 250mm
	Test Standards EN 61557-10, EN 61557-7, EN 61557-1
	IP Rating IP40
	Safety Category Voltage 300, 500V
	Power Source Battery
	Display Type Primary Display
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 40°C
	Safety Category Level CAT IV, CAT III
	Battery Type AA
	Plug Type UK

豁免

COO (Country of Origin):: GB

Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1662 UK

This multifunction tester is a handheld installation instrument designed for electrical tradespeople and field engineers to perform routine safety and diagnostic tests on installations. It combines voltage and frequency checks, polarity verification, insulation resistance up to 1000 V, loop and line impedance measurements, and RCD timing and tripping evaluation in a single portable unit for site use.

Features & Benefits

• Measures insulation resistance up to 1000V for comprehensive fault finding
• Performs RCD ramp tests and tripping current measurement for compliance checks
• Continuity test at 1 mA to protect sensitive circuits and motor windings
• Calculates PEFC and PSC from measured voltage and loop resistance
• Wireless Interface with remote probe for safer, more efficient testing
• Z-max memory stores highest loop values for Rapid evaluation

Applications

• Suitable for inspection of fixed wiring and consumer units on construction sites
• Ideal for verifying RCD performance and installation commissioning
• Used for motor winding continuity checks in maintenance routines
• Can be used to determine prospective short-circuit current for system studies
• Used with site instrumentation where portable battery-powered testing is required

What batteries does it use and how long do they typically last?

It runs on six AA cells and provides approximately 200 h of operation under normal test cycles.

Which RCD types and modes can it test automatically?

It supports A, AC, G and S RCD types, including variable-current ramp testing and automatic test sequences.

What safety and overvoltage categories apply to this instrument?

It meets CAT IV 300V and CAT III 500V overvoltage classifications for connection to distribution-level circuits.

How does it handle loop impedance measurements and reporting?

It measures phase-to-neutral and phase-to-earth impedance, offers a high-current mΩ mode, and logs Z-max values for later review.

Is the unit suitable for outdoor use in adverse conditions?

The enclosure has IP40 protection and is specified for operation between -10 °C and 40 °C.

Supplied with

The Fluke 1662 comes with:
AA batteries
Hard carrying case
Padded carrying and waist strap
Remote control probe and lead
Adapter
Heavy duty mains cord
Test leads