RS PRO IDM91E Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max
- RS庫存編號:
- 123-3244
- 製造商:
- RS PRO
Price 个**
原價 HK$1,433.10
您付款
HK$622.28
74 現貨庫存,可於3工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 HK$850.00 即可享受 免費 送貨服務
單位 | 每單位 |
---|---|
1 + | HK$622.28 |
** 參考價格
- RS庫存編號:
- 123-3244
- 製造商:
- RS PRO
- COO (Country of Origin):
- TW
RS PRO IDM91E Rugged Industrial Digital Multimeter
RS PRO IDM91E digital multimeter (DMM) designed for harsh environments. This handheld DMM is a tool which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. The rugged body guarantees drop prof resistance from up to 1.5 m. The multimeter is also waterproof with a rating of IP54. Featuring fuse protection on both 200 mA and 10 A current ranges and a specially designed beep guard system. That system provides a constant beep warning if the test leads put in the current jacks and select an incorrect function.
The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.
RS PRO IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.
This device has been designed for the most demanding users that value solid construction and highly accurate measurements.
The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.
RS PRO IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.
This device has been designed for the most demanding users that value solid construction and highly accurate measurements.
Features and Benefits
3 1/2 digit LCD
0.5% basic DCV accuracy
1.3% basic ACV accuracy
1.0% basic DCA accuracy
1.5% basic ACA accuracy
0.75% basic OHM accuracy
Continuity and diode test
500V dual-fuse protection
Auto power-off
Beep Guard™ warning system
Water resistant rating IP64
1.5m (5 feet) dropproof
Protective holster with tilt stand
IEC 1010-1 CAT.III 600V/ CAT.II 1000V
One set of 1:1 probe
0.5% basic DCV accuracy
1.3% basic ACV accuracy
1.0% basic DCA accuracy
1.5% basic ACA accuracy
0.75% basic OHM accuracy
Continuity and diode test
500V dual-fuse protection
Auto power-off
Beep Guard™ warning system
Water resistant rating IP64
1.5m (5 feet) dropproof
Protective holster with tilt stand
IEC 1010-1 CAT.III 600V/ CAT.II 1000V
One set of 1:1 probe
What does it measure?
DC and AC Voltages - up to 600 V
DC and AC Current - up to 10A
Resistance and continuity checking - up to 20 MΩ
Diode - open circuit voltage up to 3.2V
DC and AC Current - up to 10A
Resistance and continuity checking - up to 20 MΩ
Diode - open circuit voltage up to 3.2V
Batteries?
300 Hours (Alkaline)
Single 9V (NEDA 1604 or IEC 6F22)
Low battery indicator
Auto power off - approx 30 minutes after the last operation
Single 9V (NEDA 1604 or IEC 6F22)
Low battery indicator
Auto power off - approx 30 minutes after the last operation
What It Incudes?
Installed battery
Test Leads
User manual
Protective holster
Test Leads
User manual
Protective holster
Dimensions:
Without Holster:
Width 84 mm
Length 175 mm
Height 31 mm
With Holster:
Width 95 mm
Length 192 mm
Height 50 mm
Width 84 mm
Length 175 mm
Height 31 mm
With Holster:
Width 95 mm
Length 192 mm
Height 50 mm
Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries
Safety guidelines
When using any electrical test equipment it is advised that you refer to the users manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries
Safety guidelines
When using any electrical test equipment it is advised that you refer to the users manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
Standards
IEC 61010-1, CAT.III 300 v, CAT.II 600 V
Supplied with
Attribute | Value |
---|---|
Multimeter Type | Handheld |
Model Number p | IDM91E |
Display Type | Digital |
Functions Measured | AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Diode, Resistance |
Absolute Maximum AC Voltage Measurement | 600V ac |
Absolute Maximum Resistance Measurement | 20MΩ |
Absolute Maximum DC Voltage Measurement | 600V dc |
Absolute Maximum AC Current Measurement | 10A ac |
Absolute Maximum DC Current Measurement | 10A dc |
DC Current Measurement Resolution | 0.1µA dc |
AC Current Measurement Resolution | 0.1µA ac |
Resistance Measurement Resolution | 100mΩ |
AC Voltage Measurement Resolution | 0.1mV ac |
DC Voltage Measurement Resolution | 0.1mV dc |
Safety Category Level | CAT III |
Weight | 550 (With Holster)g |
Best DC Current Accuracy | ±1% + 1 Digits |
Maximum Operating Temperature | +50°C |
Best Resistance Measurement Accuracy | ±0.75% + 1 Digits |
Safety Category Voltage | 600V |
Battery Type | 9V, IEC 6F22, NEDA 1604 |
Height | 192mm |
Best DC Voltage Accuracy | ±0.5% + 1 Digits |
Best AC Voltage Accuracy | ±1.25% + 4 Digits |
Minimum Operating Temperature | 0°C |
Length | 95mm |
Width | 50mm |
Best AC Current Accuracy | ±2.5% + 3 Digits |
Dimensions | 95 x 50 x 192mm |