Electromen OY DC Motor Controller, 10/35 V dc, 15 A, Potentiometer Function

查看所有Motor Controllers

小計（1 件）*

HK$942.90

Add to Basket
選擇或輸入數量
有庫存
  • 31 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +HK$942.90

* 參考價格

RS庫存編號:
773-6841
製造零件編號:
EM-241A
製造商:
Electromen OY
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Electromen OY

Product Type

DC Motor Controller

Control Function

Potentiometer

Supply Voltage

10/35 V dc

Output Voltage

12/24 V

Current Rating

15 A

Overall Length

45mm

Overall Width

80mm

Overall Depth

45 mm

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

60°C

Standards/Approvals

No

COO (Country of Origin):
FI

Electromen - EM-241A DC MOTOR CONTROLLER 10-35 V DC, 15A


The EM-241A is a full bridge DC-motor starter. It is designed to work with DC-motor in applications where some special functions are needed.The drive has adjustable acceleration and deceleration ramps, which make possible the smooth starts and stops.Adjustable current limit protects motor against overcurrent and it can also be used as an end-stop.This device has also two settable speeds, which are useful in positioning applications.The control inputs FW and BW start the forward and backward run. STOP is for the motor shut-down, there is also individual limit inputs for FW and BW directions

SPEED-2 input activates pre-set speed-2, but it can also be used as input for analogue speed control signal 0-5V

STOP input can be set to work as current limit setting

FAULT terminal has at the same time input and output function, the pin is normally high, but is pulled down in overheat and conditionally also in current trip situation

There are two selectable control modes, continuous and impulse. In continuous mode the motor runs as long as the control is active. In impulse mode a short command starts the motor, and only a new impulse will change the status

There are special settings start-kick and auto reverse and the card has selectable input logics for both control and limit inputs

For parameters setting there are 3 options: EM-236 interface unit, EM-268 with Menthol-Lite PC-program and EM-326 with Menthol-App application for smartphone

Features and Benefits


12-24Vdc, 10-15A continuous, 25-30A peak

Speed, direction, current limiting, soft start/stop and auto-reverse control

Limit switch inputs for end of travel

Compact and DIN rail mountable;Compact with high current output

Current limit

Zero current limit

Overvoltage brake

Speed setting

Flexible control inputs

Impulse / continuous mode

DIN rail mountable

* Continuous current output when ambient temp is <50°C

12-24Vdc version drive =

15A at 100% speed / 10A at 5-99% speed

Peak (5secs) 30A

EM-24xA DC-Motor Controller


The EM-241A/ EM-243A are full bridge DC-motor starters. It is designed to work with DC-motor in applications where some special functions are needed.

Starter has adjustable acceleration and deceleration ramps, which make possible the smooth starts and stops. Adjustable current limit protects motor against overcurrent and it can also be used as an end-stop. This device has also two settable speeds, which are useful in positioning applications.

The parameters are set with EM-236 interface unit. Operation of the controller and some of its functional values can also be monitored with EM-236 interface unit.

Small size

High current output

Current limit

Zero current limit

Speed setting

Flexible control inputs

Impulse / continuous mode

Rail base mountable

Digital parameter setting

相关链接